GRIP SHS Manual Tool Changer Review: Specs, Price and Applications
The GRIP SHS is a manual tool changer with integrated pneumatic feedthroughs, optional electrical feedthroughs and a mounting surface for energy feed-through. Its interface conforms to DIN EN ISO 9409-1.
Repeatability is below 0.02 mm and it is rated for over 5,000 change cycles. A blue integrated lever allows tool-free, one-hand operation, a locking pin prevents accidental release, a cylindrical bolt locks the assemblies and closing the lever cinches them together. Optional centering discs align tools.
Quick Verdict
A precise manual changer with air passages built in, ideal for pneumatic grippers without extra couplings.
GRIP SHS Manual Tool Changer at a Glance
Specification | Details |
Product type | Manual tool changer |
Interface | DIN EN ISO 9409-1 |
Repeatability | Below 0.02 mm |
Durability | Over 5,000 changes |
Pneumatics | Integrated feedthroughs |
Electrics | Optional feedthroughs |
Operation | One-hand lever, no tools |
Material | Anodized aluminium |
Price | Request a quote |
Design and Operating Principle
Integrated pneumatic passages mean air connects as the tool locks, removing hoses that would otherwise be plugged by hand.
A cylindrical bolt and lever cinch the assemblies together, delivering repeatability below 0.02 mm so taught points remain valid.
Optional electrical feedthroughs and the SEK coupling extend it to sensor-equipped tools.
Integration and Selection
Fit upper and lower assemblies, plumb air through the integrated passages and add electrical options as needed.
Use centering discs for repeatable alignment.
Industry Applications
Industry | Typical use |
Machine tending | Pneumatic gripper changes |
Packaging | Vacuum tool changes |
Assembly | Tool swaps |
Cobots | Manual multi-tool setups |
Functional Uses
Manual tool changing
Integrated air passage
Optional signal transfer
Repeatable positioning
Pros and Cons
Advantages
Integrated pneumatics
Under 0.02 mm repeatability
One-hand operation
Locking pin
Limitations
Manual only
Electrics optional
Payload not on A3
Who Should Consider the GRIP SHS Manual Tool Changer?
The SHS suits pneumatic tool users wanting quick manual changes.
Price and Availability
Price: Request a quote. Essential Robot Products supplies the GRIP SHS in North America and prices it by configuration and quantity. Budget for adapters, mounting, air or electrical connections and commissioning as part of the complete installation.
Further Reading
GRIP SHS Manual Tool Changer FAQ
Does the SHS pass air?
Yes, it has integrated pneumatic feedthroughs.
What is the repeatability?
Below 0.02 mm.
How many changes is it rated for?
Over 5,000.
Are electrical feedthroughs available?
Optionally.
How is it operated?
With an integrated one-hand lever.
How much does it cost?
Request a quote from Essential Robot Products.
