FANUC M-710iC/12L vs Yaskawa GP25-12: Long-Reach 12 kg Robot Comparison
Updated: 10 hours ago
IN A NUTSHELL
🔎 THE KEY DIFFERENCE Both are compared at 12 kg. FANUC M-710iC/12L has the longer stated reach, which may help reach separated fixtures; it does not guarantee access at every tool angle. |
→ CONSIDER FANUC M-710iC/12L Consider it when extra reach is useful while the compared load capacity is the same. This article compares 12 kg with a published reach of 3123 mm; include the gripper and part in the load. |
→ CONSIDER Yaskawa Motoman GP25-12 Consider it when its stated load and reach already cover your task and its controls fit your equipment. This article compares 12 kg with a published reach of 2010 mm; include the gripper and part in the load. |
💡 THE TAKEAWAY Choose the robot that handles your actual tool and part through the required path, with controls and support your team can use. Compare complete installation quotes, rather than arm-only prices. |
The FANUC M-710iC/12L and the Yaskawa Motoman GP25-12 are both long-reach 12 kg robots. The M-710iC/12L reaches 3123 mm. The GP25-12 reaches 2010 mm, repeats to ±0.02 mm, weighs half as much and is listed at about a third of the price.
Quick verdict. The Yaskawa GP25-12 is the better value for long-reach handling up to 2 m, with ±0.02 mm and a listed price $50,000 lower. The FANUC M-710iC/12L is the better choice for areas beyond 2 m and laser cutting.
M-710iC/12L and GP25-12 at a glance
The FANUC M-710iC/12L carries 12 kg over 3123 mm, repeats to ±0.09 mm, weighs 540 kg and runs on the R-30iB Plus or R-30iB Mate Plus controller.
The Yaskawa Motoman GP25-12 carries 12 kg over 2010 mm, repeats to ±0.02 mm, weighs 260 kg and runs on the YRC1000 controller.
Main specification comparison
Specification | FANUC M-710iC/12L | Yaskawa Motoman GP25-12 |
Brand | FANUC | Yaskawa Motoman |
Listed price | $74,000 | $24,000 |
Payload | 12 kg | 12 kg |
Reach | 3123 mm | 2010 mm |
Repeatability | ±0.09 mm | ±0.02 mm |
Axes | 6 | 6 |
Arm weight | 540 kg | 260 kg |
Controller | R-30iB Plus (A- or B-cabinet) or R-30iB Mate Plus | YRC1000 |
Price comparison
FANUC M-710iC/12L: listed from $74,000
Yaskawa GP25-12: listed from $24,000
Difference: $50,000
The GP25-12 costs roughly 68% less
Reach
The M-710iC/12L reaches 3123 mm, about 1.1 m beyond the 2010 mm of the GP25-12. If the work area fits within 2 m, the GP25-12 covers two machines or a wide conveyor at a fraction of the cost.
Precision and weight
Yaskawa publishes ±0.02 mm for the GP25-12, three times tighter than ±0.09 mm. The GP25-12 weighs 260 kg, the M-710iC/12L 540 kg.
Processes and controllers
FANUC lists the M-710iC/12L for handling, machine tending, assembly, sealing and laser cutting on the R-30iB Plus or Mate Plus. Yaskawa positions the GP25-12 for handling, machine tending, assembly, packaging and dispensing on the YRC1000.
Best applications for the M-710iC/12L
Work areas beyond 2 m
Laser cutting and sealing
Car body and panel handling
Best applications for the Yaskawa GP25-12
Multi-machine tending
Long-reach handling within 2 m
Packaging
M-710iC/12L advantages
3123 mm reach
Laser cutting capability
M-710iC/12L limitations
About $50,000 higher listed price
540 kg arm
Yaskawa GP25-12 advantages
About 68% lower listed price
±0.02 mm repeatability
Yaskawa GP25-12 limitations
2010 mm reach
Final verdict
Choose the Yaskawa GP25-12 for reach up to 2 m. Choose the FANUC M-710iC/12L beyond that.
Sources and further reading
Frequently asked questions
Which is cheaper, the FANUC M-710iC/12L or the Yaskawa GP25-12?
The GP25-12 is listed from $24,000 and the M-710iC/12L from $74,000, a difference of $50,000.
Which robot has the longer reach?
The M-710iC/12L reaches 3123 mm; the GP25-12 2010 mm.
Which robot is more precise?
The GP25-12 publishes ±0.02 mm and the M-710iC/12L ±0.09 mm.
Do both carry 12 kg?
Yes.
How heavy are they?
The M-710iC/12L weighs 540 kg; the GP25-12 260 kg.
Which robot should I buy?
Choose the GP25-12 for reach up to 2 m. Choose the M-710iC/12L beyond that.
