FANUC M-710iC/12L vs DENSO VM-6083: Robot Comparison
Updated: 10 hours ago
IN A NUTSHELL
🔎 THE KEY DIFFERENCE This is a load-versus-reach trade-off: DENSO VM-6083 has the higher stated load capacity, while FANUC M-710iC/12L has the longer stated reach. Start with the constraint your task actually has. |
→ CONSIDER FANUC M-710iC/12L Consider it when reaching farther matters more than the higher payload of the alternative. This article compares 12 kg with a published reach of 3123 mm; include the gripper and part in the load. |
→ CONSIDER DENSO VM-6083 Consider it when additional load capacity matters more than extra reach. This article compares 13 kg with a published reach of 1,021 mm; include the gripper and part in the load. |
💡 THE TAKEAWAY Choose the robot that handles your actual tool and part through the required path, with controls and support your team can use. Compare complete installation quotes, rather than arm-only prices. |
The FANUC M-710iC/12L and the DENSO VM-6083 carry 12 and 13 kg but sit at opposite ends of the reach range. The M-710iC/12L reaches 3123 mm. The VM-6083 reaches 1021 mm, repeats to ±0.05 mm, weighs 82 kg and is listed about 39% lower.
Quick verdict. The DENSO VM-6083 is the better choice for compact handling and assembly, with ±0.05 mm and a listed price $29,000 lower. The FANUC M-710iC/12L is the better choice for work areas beyond 2 m, laser cutting and sealing large parts.
M-710iC/12L and VM-6083 at a glance
The FANUC M-710iC/12L carries 12 kg over 3123 mm, repeats to ±0.09 mm, weighs 540 kg and runs on the R-30iB Plus or R-30iB Mate Plus controller. FANUC rates the body IP54 and the wrist and J3 arm IP67.
The DENSO VM-6083 carries 13 kg over a 1021 mm maximum motion area, repeats to ±0.05 mm and weighs 82 kg. DENSO lists IP40 for the standard version and IP54 body / IP65 wrist for the dust and splash version.
Main specification comparison
Specification | FANUC M-710iC/12L | DENSO VM-6083 |
Brand | FANUC | DENSO |
Listed price | $74,000 | $45,000 |
Payload | 12 kg | 13 kg |
Reach | 3123 mm | 1,021 mm |
Repeatability | ±0.09 mm | ±0.05 mm |
Axes | 6 | 6 |
Speed | J1–J3 180°/s; J4 400°/s; J5 430°/s; J6 630°/s | Cycle time 0.89 s; max. composite speed 8,300 mm/s |
Arm weight | 540 kg | 82 kg |
IP rating | IP54 body (IP67 optional); IP67 wrist and J3 arm | IP40 standard; IP54 body / IP65 wrist (dust and splash version) |
Controller | R-30iB Plus (A- or B-cabinet) or R-30iB Mate Plus | Not specified |
Price comparison
FANUC M-710iC/12L: listed from $74,000
DENSO VM-6083: listed from $45,000
Difference: $29,000
The VM-6083 costs roughly 39% less
Reach
The M-710iC/12L reaches 3123 mm, about three times the 1021 mm of the VM-6083. It can cover car bodies, large panels and several stations from one base. The VM-6083 is a compact robot for cells where the work stays close.
Precision and weight
DENSO publishes ±0.05 mm for the VM-6083 against ±0.09 mm from FANUC for the M-710iC/12L. The VM-6083 weighs 82 kg; the M-710iC/12L 540 kg and needs a substantial foundation. Both mount on the floor or upside-down.
Processes and protection
FANUC lists handling, assembly, arc welding, sealing, mold handling, deburring and laser cutting for the M-710iC/12L, with an IP67 wrist and J3 arm. DENSO positions the VM-6083 for handling and assembly, in IP40 standard or a dust and splash version.
Best applications for the M-710iC/12L
Laser cutting of large parts
Sealing over wide areas
Multi-station handling
Best applications for the DENSO VM-6083
Compact material handling
Assembly cells
Machine loading
M-710iC/12L advantages
3123 mm reach
Wide process list
M-710iC/12L limitations
About $29,000 higher listed price
540 kg arm
DENSO VM-6083 advantages
About 39% lower listed price
±0.05 mm repeatability
82 kg arm
DENSO VM-6083 limitations
1021 mm reach
Final verdict
Choose the DENSO VM-6083 for compact cells. Choose the FANUC M-710iC/12L for very large work areas.
Sources and further reading
Frequently asked questions
Which is cheaper, the FANUC M-710iC/12L or the DENSO VM-6083?
The VM-6083 is listed from $45,000 and the M-710iC/12L from $74,000, a difference of $29,000.
Which robot has the longer reach?
The M-710iC/12L reaches 3123 mm; the VM-6083 1021 mm.
Which robot is more precise?
The VM-6083 publishes ±0.05 mm and the M-710iC/12L ±0.09 mm.
How heavy are they?
The M-710iC/12L weighs 540 kg; the VM-6083 82 kg.
Which robot carries more?
The VM-6083 carries 13 kg; the M-710iC/12L 12 kg.
Which robot should I buy?
Choose the VM-6083 for compact cells. Choose the M-710iC/12L for very large areas.
