FANUC M-410iC/110 Review: Specs, Price and Applications of the 110 kg Palletizing Robot
Updated: 2 days ago
The FANUC M-410iC/110 is a 4-axis palletizing robot with a maximum payload of 110 kg, a reach of 2403 mm and ±0.05 mm repeatability, listed from USD 70,000. This review covers its full specifications, design, programming options, applications and price, so you can decide whether it fits your automation project.
Quick Verdict
The FANUC M-410iC/110 is a 4-axis palletizing robot with a maximum wrist payload of 110 kg and a horizontal reach of 2403 mm, repeatable to ±0.05 mm. It is a dedicated palletizing robot. The mechanical unit weighs 1030 kg, mounts on the floor, and runs on the R-30iB Plus (A- or B-cabinet) controller. It is listed from USD 70,000.
FANUC M-410iC/110 at a Glance
Maximum payload: 110 kg
Reach: 2403 mm
Axes: 4
Repeatability: ±0.05 mm
Weight: 1030 kg
Controller: R-30iB Plus (A- or B-cabinet)
Price: from USD 70,000
FANUC M-410iC/110 Technical Specifications
The table below lists the published specifications of the FANUC M-410iC/110.
Specification | FANUC M-410iC/110 |
Manufacturer | FANUC |
Model | M-410iC/110 |
Robot type | 4-axis palletizing robot |
Maximum payload | 110 kg |
Reach | 2403 mm |
Axes | 4 |
Repeatability | ±0.05 mm |
Controller | R-30iB Plus (A- or B-cabinet) |
Interfaces | EtherNet/IP, PROFINET, EtherCAT, DeviceNet, CC-Link, CC-Link IE Field, PROFIBUS, FL-net, Modbus, OPC UA |
Certifications | PL e, Cat. 4, SIL 3 emergency stop function, PL d, Cat. 3, SIL 2 position/speed check function |
Starting price | From USD 70,000 |
Detailed Technical Data
4 controlled axes
Max. wrist payload 110 kg
Horizontal reach 2403 mm
Repeatability ±0.05 mm
Mass 1030 kg
Installation floor
Controller R-30iB Plus (A- or B-cabinet)
Design and Build Quality
The M-410iC/110 belongs to the FANUC M-410iC series. Published build data: mass 1030 kg; installation floor.
Programming and Software
Teach Pendant and ROBOGUIDE
The M-410iC/110 runs on the R-30iB Plus (A- or B-cabinet) controller and is programmed from the FANUC teach pendant. FANUC's ROBOGUIDE software is available for offline programming and cell simulation.
Industrial Communication
Published interfaces are EtherNet/IP, PROFINET, EtherCAT, DeviceNet, CC-Link, CC-Link IE Field, PROFIBUS, FL-net, Modbus and OPC UA.
FANUC M-410iC/110 Applications and Use Cases
Typical applications for the M-410iC/110 are material handling, machine tending, assembly, packaging, inspection and dispensing.
Material handling
A 110 kg maximum payload and a 2403 mm reach let the M-410iC/110 move parts between stations, fixtures and conveyors.
Machine tending
The M-410iC/110 loads and unloads machine tools, presses and moulding machines within its 2403 mm reach.
Assembly
Repeatability of ±0.05 mm supports fitting, inserting and fastening parts in assembly cells.
FANUC M-410iC/110 Price and Value
The FANUC M-410iC/110 is listed from USD 70,000 on All Things Cobots. The controller, end effectors, safety equipment and integration affect the final price and are quoted separately. Prices are indicative, are not final and may change.
Pros and Cons
Pros
110 kg maximum payload with a 2403 mm reach
±0.05 mm repeatability
Wide choice of industrial fieldbus interfaces
Cons
4 axes limit tool orientation compared with a 6-axis arm
Needs safety fencing or equivalent safeguarding
The 110 kg maximum payload includes the end effector
End effectors, safety equipment and integration are quoted separately
Who Should Buy the FANUC M-410iC/110?
The FANUC M-410iC/110 fits end-of-line operations that palletize cases, bags or crates.
See the full FANUC M-410iC/110 product listing on All Things Cobots.
FANUC M-410iC/110 FAQ
How much does the FANUC M-410iC/110 cost?
The FANUC M-410iC/110 is listed from USD 70,000 on All Things Cobots. The price is indicative and may change, and it does not include end effectors, safety equipment or integration.
What is the payload and reach of the FANUC M-410iC/110?
The M-410iC/110 has a maximum payload of 110 kg and a reach of 2403 mm.
How accurate is the FANUC M-410iC/110?
Its published repeatability is ±0.05 mm.
How many axes does the FANUC M-410iC/110 have?
The M-410iC/110 has 4 axes.
How is the FANUC M-410iC/110 programmed?
It is programmed from the FANUC teach pendant, and ROBOGUIDE is available for offline programming and simulation.
Which controller does the FANUC M-410iC/110 use?
It runs on the R-30iB Plus (A- or B-cabinet) controller.
How much does the FANUC M-410iC/110 weigh?
Published mass 1030 kg.
How can the FANUC M-410iC/110 be mounted?
Published installation options: floor.
What is the FANUC M-410iC/110 used for?
Typical applications are material handling, machine tending, assembly, packaging, inspection and dispensing.
Specifications and prices are based on manufacturer and distributor information. Prices are indicative, are not final and may change.
