FANUC M-10iD/8L vs Yaskawa GP8: 8 kg Robot Comparison
Updated: 10 hours ago
IN A NUTSHELL
🔎 THE KEY DIFFERENCE Both are compared at 8 kg. FANUC M-10iD/8L has the longer stated reach, which may help reach separated fixtures; it does not guarantee access at every tool angle. |
→ CONSIDER FANUC M-10iD/8L Consider it when extra reach is useful while the compared load capacity is the same. This article compares 8 kg with a published reach of 2032 mm; include the gripper and part in the load. |
→ CONSIDER Yaskawa Motoman GP8 Consider it when its stated load and reach already cover your task and its controls fit your equipment. This article compares 8 kg with a published reach of 727 mm; include the gripper and part in the load. |
💡 THE TAKEAWAY Choose the robot that handles your actual tool and part through the required path, with controls and support your team can use. Compare complete installation quotes, rather than arm-only prices. |
The FANUC M-10iD/8L and the Yaskawa Motoman GP8 both carry 8 kg, but the M-10iD/8L reaches 2032 mm and the GP8 727 mm. The GP8 repeats to ±0.01 mm, is rated IP67, weighs 35 kg and is listed at about a third of the price.
Quick verdict. The Yaskawa GP8 is the better choice for compact machine tending and assembly, with ±0.01 mm, IP67 and a listed price $27,000 lower. The FANUC M-10iD/8L is the better choice for long-reach handling and welding of large parts.
M-10iD/8L and GP8 at a glance
The FANUC M-10iD/8L carries 8 kg over 2032 mm, repeats to ±0.03 mm, weighs 180 kg and runs on the R-30iB Plus or R-30iB Mate Plus controller.
The Yaskawa Motoman GP8 carries 8 kg over 727 mm, repeats to ±0.01 mm, weighs 35 kg, is rated IP67 and runs on the YRC1000 or YRC1000micro controller.
Main specification comparison
Specification | FANUC M-10iD/8L | Yaskawa Motoman GP8 |
Brand | FANUC | Yaskawa Motoman |
Listed price | $42,000 | $15,000 |
Payload | 8 kg | 8 kg |
Reach | 2032 mm | 727 mm |
Repeatability | ±0.03 mm | ±0.01 mm |
Axes | 6 | 6 |
Arm weight | 180 kg | 35 kg |
IP rating | Not specified | IP67 |
Controller | R-30iB Plus (A- or B-cabinet) or R-30iB Mate Plus | YRC1000 / YRC1000micro |
Price comparison
FANUC M-10iD/8L: listed from $42,000
Yaskawa GP8: listed from $15,000
Difference: $27,000
The GP8 costs roughly 64% less
Same payload, different reach
Both carry 8 kg. The M-10iD/8L reaches 2032 mm, almost three times the 727 mm of the GP8. That difference decides the cell: the FANUC serves wide areas and several stations, the GP8 a single machine or bench.
Precision, protection and weight
Yaskawa publishes ±0.01 mm for the GP8, against ±0.03 mm for the M-10iD/8L, and rates it IP67. The GP8 weighs 35 kg, the M-10iD/8L 180 kg.
Processes and controllers
FANUC lists the M-10iD/8L for handling, assembly, arc welding, sealing, mold handling and deburring. Yaskawa positions the GP8 for handling, machine tending, assembly, packaging, inspection and dispensing, on the YRC1000 or YRC1000micro.
Best applications for the M-10iD/8L
Long-reach handling
Welding and sealing large parts
Multi-station cells
Best applications for the Yaskawa GP8
Compact CNC tending
Precise assembly
Packaging
M-10iD/8L advantages
2032 mm reach
Welding capability
M-10iD/8L limitations
About $27,000 higher listed price
180 kg arm
Yaskawa GP8 advantages
About 64% lower listed price
±0.01 mm repeatability
IP67, 35 kg arm
Yaskawa GP8 limitations
727 mm reach
Final verdict
Choose the Yaskawa GP8 for compact cells. Choose the FANUC M-10iD/8L for long reach.
Sources and further reading
Frequently asked questions
Which is cheaper, the FANUC M-10iD/8L or the Yaskawa GP8?
The GP8 is listed from $15,000 and the M-10iD/8L from $42,000, a difference of $27,000.
Do both carry 8 kg?
Yes.
Which robot has the longer reach?
The M-10iD/8L reaches 2032 mm; the GP8 727 mm.
Which robot is more precise?
The GP8 publishes ±0.01 mm and the M-10iD/8L ±0.03 mm.
Is the GP8 IP67?
Yes.
Which robot should I buy?
Choose the GP8 for compact cells. Choose the M-10iD/8L for long reach.
