FANUC CR-35iB Review: Specs, Price and Applications of the 35 kg Collaborative Robot
Updated: 2 days ago
The FANUC CR-35iB is a 6-axis collaborative robot with a maximum payload of 35 kg, a reach of 1831 mm and ±0.03 mm repeatability, listed from USD 85,000. This review covers its full specifications, design, programming options, applications and price, so you can decide whether it fits your automation project.
Quick Verdict
The FANUC CR-35iB is a 6-axis collaborative robot with a maximum wrist payload of 35 kg and a horizontal reach of 1831 mm, repeatable to ±0.03 mm. It is a power-and-force-limited robot built to work next to operators without safety fences on tasks such as parts assembly and workpiece transfer. The mechanical unit weighs 375 kg, mounts on the floor, and runs on the R-30iB Plus (A-cabinet) controller. It is listed from USD 85,000.
FANUC CR-35iB at a Glance
Maximum payload: 35 kg
Reach: 1831 mm
Axes: 6
Repeatability: ±0.03 mm
Weight: 375 kg
Controller: R-30iB Plus (A-cabinet)
Price: from USD 85,000
FANUC CR-35iB Technical Specifications
The table below lists the published specifications of the FANUC CR-35iB.
Specification | FANUC CR-35iB |
Manufacturer | FANUC |
Model | CR-35iB |
Robot type | 6-axis collaborative robot |
Maximum payload | 35 kg |
Reach | 1831 mm |
Axes | 6 |
Repeatability | ±0.03 mm |
Controller | R-30iB Plus (A-cabinet) |
Interfaces | EtherNet/IP, PROFINET, EtherCAT, DeviceNet, CC-Link, CC-Link IE Field, PROFIBUS, FL-net, Modbus, OPC UA |
Certifications | ISO 10218-1, PL e, Cat. 4, SIL 3 emergency stop function, PL d, Cat. 3, SIL 2 position/speed check function |
Starting price | From USD 85,000 |
Detailed Technical Data
6 controlled axes
Max. wrist payload 35 kg
Horizontal reach 1831 mm
Repeatability ±0.03 mm
Mass 375 kg
Installation floor
Controller R-30iB Plus (A-cabinet)
Design and Build Quality
The CR-35iB belongs to the FANUC CR-35iB series. Published build data: mass 375 kg; installation floor.
Programming and Software
Teach Pendant and ROBOGUIDE
The CR-35iB runs on the R-30iB Plus (A-cabinet) controller and is programmed from the FANUC teach pendant. FANUC's ROBOGUIDE software is available for offline programming and cell simulation.
Industrial Communication
Published interfaces are EtherNet/IP, PROFINET, EtherCAT, DeviceNet, CC-Link, CC-Link IE Field, PROFIBUS, FL-net, Modbus and OPC UA.
FANUC CR-35iB Applications and Use Cases
Typical applications for the CR-35iB are collaborative handling, machine tending, palletizing and assembly.
Collaborative handling
The CR-35iB is used for collaborative handling within its 35 kg payload and 1831 mm reach.
Machine tending
The CR-35iB loads and unloads machine tools, presses and moulding machines within its 1831 mm reach.
Palletizing
The CR-35iB stacks cases, bags and crates onto pallets, lifting up to 35 kg including the gripper.
FANUC CR-35iB Price and Value
The FANUC CR-35iB is listed from USD 85,000 on All Things Cobots. The controller, end effectors, safety equipment and integration affect the final price and are quoted separately. Prices are indicative, are not final and may change.
Pros and Cons
Pros
35 kg maximum payload with a 1831 mm reach
±0.03 mm repeatability
Collaborative design for work near people, subject to a risk assessment
Wide choice of industrial fieldbus interfaces
Cons
The 35 kg maximum payload includes the end effector
End effectors, safety equipment and integration are quoted separately
Who Should Buy the FANUC CR-35iB?
The FANUC CR-35iB fits manufacturers that want a robot working near people without full fencing, subject to a risk assessment.
See the full FANUC CR-35iB product listing on All Things Cobots.
FANUC CR-35iB FAQ
How much does the FANUC CR-35iB cost?
The FANUC CR-35iB is listed from USD 85,000 on All Things Cobots. The price is indicative and may change, and it does not include end effectors, safety equipment or integration.
What is the payload and reach of the FANUC CR-35iB?
The CR-35iB has a maximum payload of 35 kg and a reach of 1831 mm.
How accurate is the FANUC CR-35iB?
Its published repeatability is ±0.03 mm.
How many axes does the FANUC CR-35iB have?
The CR-35iB has 6 axes.
How is the FANUC CR-35iB programmed?
It is programmed from the FANUC teach pendant, and ROBOGUIDE is available for offline programming and simulation.
Which controller does the FANUC CR-35iB use?
It runs on the R-30iB Plus (A-cabinet) controller.
How much does the FANUC CR-35iB weigh?
Published mass 375 kg.
How can the FANUC CR-35iB be mounted?
Published installation options: floor.
Is the FANUC CR-35iB a collaborative robot?
Yes. The CR-35iB is a collaborative robot. Every collaborative application still needs its own risk assessment.
What is the FANUC CR-35iB used for?
Typical applications are collaborative handling, machine tending, palletizing and assembly.
Specifications and prices are based on manufacturer and distributor information. Prices are indicative, are not final and may change.
