Elmo Tambourine 20 Servo Power Supply Review: Specs, Price and Applications
Updated: 7 days ago
Tambourine-20 is an AC-to-DC supply for a specified group of servo drives. The exact input-voltage model determines the DC bus and compatible drives, while continuous/peak current and braking duty impose separate system limits.
Quick Verdict
Consider Tambourine-20 when its documented input, bus and energy-management arrangement fit the complete servo system. Confirm drive isolation, simultaneous current and braking requirements; direct-to-mains capability does not make every drive connection appropriate.
Elmo Tambourine 20 Servo Power Supply at a Glance
Reviewed supply: Tambourine-20
Function: Rectified/filtered DC bus for multiple compatible drives
Current reference: 20 A continuous / 40 A peak; exact operating conditions govern
Input arrangement: Specified single-/three-phase variants and operating conditions
Bus selection: Input-voltage model determines nominal DC output and drive compatibility
Energy handling: Braking/shunt capability and duty must be assessed for the actual load
Price: Request a quote for the exact ordering configuration.
Technical Specifications
Specification | Documented configuration |
Reviewed supply | Tambourine-20 |
Function | Rectified/filtered DC bus for multiple compatible drives |
Current reference | 20 A continuous / 40 A peak; exact operating conditions govern |
Input arrangement | Specified single-/three-phase variants and operating conditions |
Bus selection | Input-voltage model determines nominal DC output and drive compatibility |
Energy handling | Braking/shunt capability and duty must be assessed for the actual load |
Design and Build
Choose the input-voltage model and phase arrangement before sizing the shared bus. The supply description includes single-phase operation, but its conditions should be checked in the matching manual. Do not assume that every rating applies unchanged across all input arrangements. Preserve the accepted supply reference and actual drive population.
Specify a servo power supply with the actual AC input, DC-bus loads, enclosure, cooling and required connection hardware. Distinguish continuous demand from transient acceleration and regenerative energy. Use the selected product's electrical and installation documentation. The supply's headline power does not establish the capacity of every input-voltage or thermal condition.
Configuration and Integration
Continuous load, short peak demand and returned braking energy are different selection inputs. Assess the real simultaneous axis cycle and required shunt arrangement. The product's braking capability should not be described as regeneration back into the AC mains unless the selected documentation establishes that architecture. Confirm resistor/duty and thermal conditions through the qualified electrical design.
Define the complete power sequence and the roles of supply, drives, bus management and fault reporting. Confirm electrical compatibility and the specified protection, grounding and discharge arrangements through the qualified machine design. Preserve the accepted load configuration and connection records. Supply protection features do not replace the complete equipment's electrical and protective design.
Applications and Use Cases
Evaluate Tambourine-20 for an engineered servo-power arrangement with known input, drives and simultaneous motion duty. Confirm the full supply model and braking requirements.
Plan power sequencing, diagnostics and discharge behavior for the complete equipment. An internal filter or inrush-control function does not independently qualify every installation's EMC or protective design. Validate actual start, load, stop and permitted recovery through the approved procedure. Reassess the power arrangement when another drive or a more demanding cycle is introduced.
Assess the power arrangement through the actual simultaneous motion duty. Continuous draw, transient demand and returned energy affect different parts of the design. A rated efficiency or power-factor figure is distinct from measured facility energy savings or the complete installed system's performance.
Alternatives and Selection
Compare compatible supplies using the same input, DC bus, axis duty and returned energy. Include isolation, protection, shunt components, cooling and restoration.
Price and Value
Price: Request a quote. The quotation should identify the exact product configuration, included options, delivery terms and support scope. Accessories and integration work should be listed separately so the hardware price can be compared on a like-for-like basis. A family name or headline specification is not a complete purchasing description.
Assess value against the work the product enables in the machine. Include the engineering needed to configure it, the equipment that must operate alongside it and the effort required to maintain or replace it. A lower component price can be outweighed by extra integration work, while additional features are valuable only when the application can use them. Compare written configurations rather than assumed package contents.
Pros and Cons
Pros
Shared DC supply supports an identified multi-drive arrangement
Documented input models permit explicit bus matching
Braking and diagnostic provisions support a complete power design
Cons
Drive isolation and bus-voltage compatibility require exact checking
Continuous, peak and braking duties have different limits
Internal functions do not qualify the whole electrical installation
Who Should Consider Elmo Tambourine 20 Servo Power Supply?
Consider Tambourine-20 when its documented input, bus and energy-management arrangement fit the complete servo system. Confirm drive isolation, simultaneous current and braking requirements; direct-to-mains capability does not make every drive connection appropriate.
The strongest purchasing case is a clearly defined requirement that matches the documented configuration. If the project depends on a particular option, interface or mechanical arrangement, include it explicitly in the order. Keep the accepted configuration with the equipment documentation so a later replacement preserves the intended application.
Commissioning and Acceptance
Validate the installed power arrangement through the applicable approved electrical procedure with representative loads and motion cycles. Verify sequencing, diagnostics and recovery within the equipment's documented limits. Record the actual supply, connected drive population and energy-management components. Reassess loading when an axis, cycle or input-power arrangement changes.
Elmo Tambourine 20 Servo Power Supply FAQ
What is Elmo Tambourine 20 Servo Power Supply?
Tambourine-20 is an AC-to-DC supply for a specified group of servo drives. The exact input-voltage model determines the DC bus and compatible drives, while continuous/peak current and braking duty impose separate system limits.
Which configuration is reviewed?
Reviewed supply: Tambourine-20. Function: Rectified/filtered DC bus for multiple compatible drives.
What is the main selection consideration?
Consider Tambourine-20 when its documented input, bus and energy-management arrangement fit the complete servo system. Confirm drive isolation, simultaneous current and braking requirements; direct-to-mains capability does not make every drive connection appropriate.
What applications should it be considered for?
Evaluate Tambourine-20 for an engineered servo-power arrangement with known input, drives and simultaneous motion duty. Confirm the full supply model and braking requirements.
What is a documented advantage?
Shared DC supply supports an identified multi-drive arrangement. Documented input models permit explicit bus matching.
What limitation matters during integration?
Drive isolation and bus-voltage compatibility require exact checking. Continuous, peak and braking duties have different limits.
What is the price?
Price: Request a quote. Specify the exact ordering configuration, required options, accessories and delivery terms.
How should an alternative be compared?
Compare compatible supplies using the same input, DC bus, axis duty and returned energy. Include isolation, protection, shunt components, cooling and restoration.
Product information: Elmo Tambourine-20 manufacturer product specifications and installation-guide references, with the supplier-authored listing.
Pricing is quotation-based and may change. Options, availability, delivery and application requirements depend on the selected ordering configuration.
