Chromasens allPIXA SWIR Review: Specs & Applications
Updated: 7 days ago
Chromasens allPIXA SWIR offers a 1024-pixel InGaAs line option with 12.5 µm pitch, 950–1700 nm response and up to 40 kHz scanning. The manual also lists a separate 512-pixel option. Price: Request a quote.
The camera should be selected as part of an imaging system rather than evaluated from one headline specification. The useful result is an image that reveals the required feature at the right time, followed by a reliable inspection or measurement decision. This review considers the documented acquisition package, optical implications and practical purchasing scope for allPIXA SWIR.
Quick Verdict
allPIXA SWIR merits evaluation when infrared material contrast is needed in a controlled scanning station. The supplied entry highlights the uncooled 1K model, while the manual also describes a separate 512-pixel option. The value is useful spectral information at the required spatial scale, not simply a faster visible-image substitute.
allPIXA SWIR at a Glance
Product: Chromasens allPIXA SWIR
Image format: 1024 × 1
Acquisition: Ingaas Line-Scan Acquisition
Interface: GigE Vision or Camera Link ordering versions
Capture rate: Up to 40 kHz line frequency
Spectral band: 950–1700 nm
Reviewed 1K option: 1024 pixels; 12.5 µm pitch
Separate 512 option: 512 pixels; 25 µm pitch
Output: 8, 10 or 12-bit monochrome
Cooling scope: Uncooled sensor as cataloged
Mount: C-mount; other adapter options require confirmation
Price: Request a quote
allPIXA SWIR Technical Specifications
Specification | Value or configuration |
Product | Chromasens allPIXA SWIR |
Image format | 1024 × 1 |
Acquisition | Ingaas Line-Scan Acquisition |
Interface | GigE Vision or Camera Link ordering versions |
Capture rate | Up to 40 kHz line frequency |
Spectral band | 950–1700 nm |
Reviewed 1K option | 1024 pixels; 12.5 µm pitch |
Separate 512 option | 512 pixels; 25 µm pitch |
Output | 8, 10 or 12-bit monochrome |
Cooling scope | Uncooled sensor as cataloged |
Mount | C-mount; other adapter options require confirmation |
Price | Request a quote |
Design and Optical Requirements
The 1024-pixel option uses 12.5 µm pitch, and the separate 512 option uses 25 µm pitch across a related active width. Select a lens with adequate SWIR transmission and focus over 950–1700 nm. The included C-mount adapter does not establish optical compatibility for every visible-light lens. Evaluate thermal setup and field illumination with real samples.
Acquisition Speed and Integration
The manual specifies up to 40 kHz and documents free-run, software and external-trigger scanning. The GigE and Camera Link versions require different receivers and control arrangements. For the documented GigE setup, an encoder frequency converter supports transport synchronization. Confirm the chosen line rate, output representation and motion recipe together.
Programming and Image Processing
The documented capabilities include external triggering, encoder frequency conversion on documented GigE setup, flat-field correction, internal test-image generation, software-triggered or free-run scanning. Use those controls to establish a repeatable acquisition recipe for the station. Determine which adjustments are performed in the camera and which belong in the host software. Store the chosen settings with the inspection configuration so an operator or service technician can reproduce the image used during commissioning. A parameter change should be evaluated against both good and faulty samples before it becomes the production default.
Image Data and Host Capacity
Budget pixels per line, selected bit representation and actual line frequency. A scan image is assembled over successive line positions, so retained image height and motion sampling also matter. GigE and Camera Link use different receiving setups. Include buffers and correction or analysis work in the acceptance run, and validate the selected output format rather than assuming a conventional area-frame payload.
allPIXA SWIR Applications and Use Cases
Material, surface and sorting inspection can merit a spectral trial when actual fault and normal samples respond differently in the band. Include realistic thickness, finish and illumination variation. Test image geometry along transport as well as contrast across the sensor line. A wavelength range alone does not establish reliable material classification.
Building a Useful Acceptance Trial
Prepare representative parts or scenes that include the smallest required feature, normal production variation and realistic faults. Confirm the field of view and exposure before tuning the inspection. Record wrong accepts, wrong rejects, missing frames and the complete trigger-to-decision timing. A trial should also show what happens when the expected image is absent or unusable. This connects camera selection to the station's actual acceptance requirement rather than relying on a sharp reference picture.
allPIXA SWIR Price and Value
Price: Request a quote. Ask for the complete allPIXA SWIR ordering code and an itemized scope covering the camera, suitable optics, receiving hardware, cables, power and commissioning. Compare quotations for the same image format, acquisition mode and integration scope. The cost of a camera component is different from the cost of a working inspection station. Evaluate any financial return with the plant's actual labor, defect, rework and maintenance data; no universal payback period follows from these specifications.
Comparison and Selection
An area-scan SWIR camera observes a complete scene per exposure, while this line camera builds an image over motion. The 512 and 1024 allPIXA SWIR variants also offer different cross-track sampling. Color allPIXA families supply another spectral scope. Choose the smallest acquisition arrangement that demonstrates the required distinction.
Ordering, Environment and Lifecycle
Quote the complete 01K or 512 code and GE or CL interface. The cited GigE manual lists IP40 and calls for thermally conductive mounting; do not transfer sealed-camera or cooled-camera claims into this review. Match SDK and features-reference version to the delivered firmware and verify current support.
Pros and Cons
Pros
Documented 1K InGaAs SWIR line option.
40 kHz class and several output representations.
Flat-field and scan-synchronization controls.
Cons
Spectral optics and material evaluation are required.
Motion determines constructed-image geometry.
Interface, thermal and firmware scope need exact ordering.
Who Should Buy allPIXA SWIR?
Shortlist allPIXA SWIR when its documented sensor, interface and acquisition mode match the imaging task and the team can demonstrate the complete host pipeline. Use the sample trial to establish whether the relevant features remain distinguishable under the expected lighting, presentation and motion. Before purchase, settle the optical configuration, ordering variants and support requirements. The best choice is the configuration that satisfies the acceptance criteria with a maintainable system architecture.
allPIXA SWIR FAQ
Is allPIXA SWIR an area camera?
It uses line-scan acquisition. An area image is constructed from successive lines as the target or scan moves.
What line format is documented?
The reviewed 1K option has 1024 pixels at 12.5 µm; a separate 512-pixel option uses 25 µm.
What rate is documented?
Up to 40 kHz. Specify the exact current operating mode.
Is line frequency a frame rate?
No. Image height and sampling along motion determine the constructed area-image scope.
Which receiving interface is described?
GigE Vision or Camera Link ordering variants. Match receiver, output representation and control setup to the exact ordering code.
What is the main selection distinction?
Use the exact sensor width, spectral optics and scan geometry; the camera is not an area-frame model.
What is the price?
Price: Request a quote for the camera, optics, illumination, synchronization, receiver and commissioning.
What should acceptance verify?
Verify feature contrast, channel registration where applicable, spatial geometry, sustained acquisition and the actual inspection decision.
Price: Request a quote. Final configuration, pricing, availability and support terms depend on the supplier's current quotation.
