CCS XC Series Review: Specs, Price and Integration
Updated: 7 days ago
CCS XC Series provides compact two-channel machine-vision lighting control. The XC-D3524-2-ET(A) example offers Ethernet communication and 1024 intensity settings, with 35 W shared across both channels. An advertised used unit at US$326.90 is the indicative price reference for this source-based review.
Technical Specifications
Parameter | Specification |
Model example | XC-D3524-2-ET(A) |
Channels | 2 |
Rated lighting output | 24 V DC; 35 W / 1.4 A total across both channels |
Drive architecture | Constant voltage |
Lighting modes | Continuous or strobe; not enhanced-voltage overdrive |
Intensity adjustment | 1024 steps; PWM and lighting-time control |
Communication | Ethernet; confirm exact command interface for integration |
Indicative used asking price | US$326.90, nikoparts12 marketplace listing |
Quick Verdict
XC is a sensible candidate when an inspection station needs two controlled lighting channels and the selected light units fit its electrical limits. The most important sizing detail is the combined output allowance: this is not a separate 35 W budget for each channel. This documentation-based review assesses selection and integration; it does not report laboratory brightness, image-quality or timing measurements.
Design and Light Compatibility
Select the controller from the actual light-unit requirement. Match the light's rated voltage, connection and power demand to the exact controller model. Document which light is assigned to each channel, then calculate the combined load. A controller with two outlets does not automatically provide the electrical or optical performance a particular inspection needs.
Continuous and Strobe Operation
CCS identifies continuous and strobe operation and explicitly distinguishes this product from enhanced-voltage overdrive strobing. Choose the illumination strategy from the exposure and object-motion requirement. Test the result with the intended camera and light rather than equating a strobe setting with a guaranteed reduction in motion blur. Preserve the selected exposure and illumination settings together.
Intensity and Image Evaluation
The available intensity settings provide a way to adjust the acquisition setup. Their number is not a measurement of inspection accuracy. Evaluate representative parts across the operating conditions the system must tolerate. Keep the image set and acceptance criteria with the chosen settings, so an apparent improvement in one image does not conceal a loss of performance elsewhere in the inspection.
Programming and Ethernet Integration
Ethernet communication is part of the product description, and CCS provides sample-program resources. Confirm the command format and supported behavior in the exact manual before writing the machine interface. Define who controls the lighting settings and how the machine restores them after a restart. A network connection alone does not establish compatibility with an arbitrary industrial fieldbus.
Installation and Commissioning
Label each light and channel and make the controller accessible for service. Verify the installed environment against the manufacturer's instructions, including cooling and temperature requirements. Commission one channel at a time before checking the combined sequence. Retain the final configuration with the camera recipe so a replacement controller can be restored to an identified state.
Applications and Use Cases
A proposed application is a two-light inspection station that uses different illumination arrangements for separate image acquisitions. This is a design scenario, not a tested installation. Establish the required visual evidence first, then decide how each light contributes to it. If the application needs more channels, greater power or overdrive operation, compare a controller intended for those requirements.
Price and Value
The retrieved nikoparts12 marketplace listing advertises used XC-D3524-2-ET(A) at US$326.90, item 197912536152. The displayed shipping charge is US$118, separate from the unit price; destination, tax and final terms must be checked. This is an indicative secondary-market asking price, not current CCS new-product pricing. Confirm exact suffix, condition and included accessories. Price source: https://www.ebay.com/itm/197912536152 .
Comparison and Selection
Compare XC with other lighting controllers by compatible load, channel count, required lighting mode and the control interface. A high-power overdrive controller and a constant-voltage controller should not be treated as equivalent simply because both offer strobe settings. Include the light units, cables and software integration when comparing a complete inspection solution.
Pros, Cons and Buying Recommendation
The strengths are a compact two-channel arrangement and documented local and communication-control features. The limits are the shared output capacity and the absence of enhanced-voltage overdrive. Shortlist XC when the exact light pair and acquisition sequence fit those boundaries. Technical references: https://www.ccs-grp.com/products/model/3340 and the supplier-authored family listing https://www.automate.org/products/ccs-inc/xc-series . The cover illustrates the series rather than certifying the condition of the used offer.
Pros
Two lighting channels in a compact controller
Continuous and strobe operation
Ethernet communication and manufacturer sample resources
Cons
35 W capacity is shared across both channels
Not an enhanced-voltage overdrive controller
Used price and shipping require offer-specific evaluation
XC-D3524-2-ET(A) FAQ
Which XC model is examined?
XC-D3524-2-ET(A), within the CCS XC Series.
Is 35 W available on each channel?
No. CCS specifies 35 W total for the two channels.
Is it a constant-current controller?
The referenced model is specified as constant voltage.
Does its strobe mode provide enhanced-voltage overdrive?
No. CCS explicitly distinguishes the lighting mode from enhanced-voltage overdrive.
What is the indicative price?
US$326.90 used, advertised by nikoparts12 in item 197912536152, with shipping separate.
Does Ethernet establish EtherNet/IP support?
Do not infer that. Confirm the exact supported command interface in the model documentation.
How should the two channels be commissioned?
Verify each light and its settings separately, then validate the combined camera-and-light sequence.
Were brightness or inspection accuracy measured?
No. This review is based on published specifications and an identified seller listing.
Prices are indicative and may change with model, condition and supply terms.
