BlueVision BV-C8300 Review: Specs & Applications
Updated: 7 days ago
BlueVision’s BV-C8300 is a three-CCD prism color area-scan camera. The supplier listing describes VGA progressive-scan sensors and up to 200 fps; the manufacturer lists the model end of production. Price: Request a quote for support or replacement.
The camera should be selected as part of an imaging system rather than evaluated from one headline specification. The useful result is an image that reveals the required feature at the right time, followed by a reliable inspection or measurement decision. This review considers the documented acquisition package, optical implications and practical purchasing scope for BV-C8300.
Quick Verdict
BV-C8300 is most useful today as a reference for maintaining or replacing an installed prism color system. Its three sensors provide separate RGB acquisition, while the modest VGA spatial format limits detail over a large field. The appropriate comparison is preserved color and timing behavior, not a general claim that three sensors outperform every single-sensor alternative.
BV-C8300 at a Glance
Product: BlueVision BV-C8300
Image format: Three 1/3-inch VGA progressive-scan CCD channels
Acquisition: Progressive-Scan Ccd Acquisition
Interface: Confirm exact BV-C8300 receiver and output configuration
Capture rate: Listed maximum 200 fps
Architecture: Three-CCD RGB prism area-scan
Color acquisition: Separate red, green and blue sensor channels
Lifecycle: End of production
Price: Request a quote
BV-C8300 Technical Specifications
Specification | Value or configuration |
Product | BlueVision BV-C8300 |
Image format | Three 1/3-inch VGA progressive-scan CCD channels |
Acquisition | Progressive-Scan Ccd Acquisition |
Interface | Confirm exact BV-C8300 receiver and output configuration |
Capture rate | Listed maximum 200 fps |
Architecture | Three-CCD RGB prism area-scan |
Color acquisition | Separate red, green and blue sensor channels |
Lifecycle | End of production |
Price | Request a quote |
Design and Optical Requirements
A prism-compatible optical arrangement must maintain focus and channel registration. Evaluate color-dependent features under stable illumination with representative surface variation. A lens swap can change registration or color response, so the installed optical setup should be part of the baseline comparison. VGA sampling may be sufficient for a broad color distinction but needs testing for fine defects.
Acquisition Speed and Integration
The directory lists a maximum of 200 fps without a complete operating-mode table. Confirm the actual output, exposure settings and receiving hardware for the installed unit. Progressive scan describes image acquisition organization; this review does not infer a particular CMOS shutter specification. The complete processing and decision cycle must be measured separately.
Programming and Image Processing
The documented capabilities include prism RGB separation, progressive-scan image capture, three-channel color acquisition. Use those controls to establish a repeatable acquisition recipe for the station. Determine which adjustments are performed in the camera and which belong in the host software. Store the chosen settings with the inspection configuration so an operator or service technician can reproduce the image used during commissioning. A parameter change should be evaluated against both good and faulty samples before it becomes the production default.
Image Data and Host Capacity
Three spectral channels are not three times the spatial width of one scene. Size receiving buffers from the actual per-channel grid, output representation and acquisition mode. The application must preserve channel association and interpret the delivered color format. An installed-system replacement should also check whether existing software expects raw channels or a combined color image.
BV-C8300 Applications and Use Cases
Fast observation of color-dependent features can merit evaluation in an established system. Include the intended exposure and lighting pulse behavior, especially for moving targets. The useful result is repeatable discrimination of the required feature across normal color and finish variation. No inspection accuracy follows from the sensor count or listed rate alone.
Building a Useful Acceptance Trial
Prepare representative parts or scenes that include the smallest required feature, normal production variation and realistic faults. Confirm the field of view and exposure before tuning the inspection. Record wrong accepts, wrong rejects, missing frames and the complete trigger-to-decision timing. A trial should also show what happens when the expected image is absent or unusable. This connects camera selection to the station's actual acceptance requirement rather than relying on a sharp reference picture.
BV-C8300 Price and Value
Price: Request a quote. Ask for the complete BV-C8300 ordering code and an itemized scope covering the camera, suitable optics, receiving hardware, cables, power and commissioning. Compare quotations for the same image format, acquisition mode and integration scope. The cost of a camera component is different from the cost of a working inspection station. Evaluate any financial return with the plant's actual labor, defect, rework and maintenance data; no universal payback period follows from these specifications.
Comparison and Selection
The BV-C8320 uses three global-shutter CMOS sensors with a larger full image and a different full-resolution rate. Its VGA high-speed mode is another specific configuration. A current BV-C8321 or BVC8350 replacement needs its own optical, interface and processing review rather than inheriting the CCD model’s characteristics.
Ordering, Environment and Lifecycle
The manufacturer lists BV-C8300 end of production. Ask about service, spare units and the current recommended replacement. Preserve installed ordering code, receiver settings and example image sequences before migration. A modern color camera may require new calibration even when it supplies an image with similar dimensions.
Pros and Cons
Pros
Separate RGB acquisition through a prism.
Documented progressive-scan CCD architecture.
Defined reference for an installed high-rate VGA color system.
Cons
End-of-production lifecycle.
VGA sampling limits detailed wide-field inspection.
Output mode and replacement compatibility need confirmation.
Who Should Buy BV-C8300?
Shortlist BV-C8300 when its documented sensor, interface and acquisition mode match the imaging task and the team can demonstrate the complete host pipeline. Use the sample trial to establish whether the relevant features remain distinguishable under the expected lighting, presentation and motion. Before purchase, settle the optical configuration, ordering variants and support requirements. The best choice is the configuration that satisfies the acceptance criteria with a maintainable system architecture.
BV-C8300 FAQ
What sensor architecture is listed?
Three progressive-scan CCDs behind RGB prism optics are described.
What spatial format is named?
The supplier names 1/3-inch VGA sensors. Confirm the exact delivered grid and color format from the installed model documentation.
What maximum rate is listed?
The directory states up to 200 fps; verify the operating mode and output configuration.
Is BV-C8300 still produced?
The manufacturer lists BV-C8300 as end of production.
Does three CCDs mean three times the image resolution?
No. They supply separate RGB information from the optical scene, not one image three times wider.
Is BV-C8320 the same model?
No. BV-C8320 uses a three-CMOS architecture and has different full-resolution and VGA-mode rates.
What is the price?
Price: Request a quote for support, available supply or a complete replacement proposal.
What should migration testing verify?
Verify color response, channel registration, trigger timing, receiving software and actual inspection decisions.
Price: Request a quote. Final configuration, pricing, availability and support terms depend on the supplier's current quotation.
