Basler blaze Review: Specs and Uses of the IP67 Time-of-Flight 3D Camera
Updated: 7 days ago
The Basler blaze is a Time-of-Flight 3D camera for logistics, robotics and mobile machines. Prices depend on model and are shown in Basler's web shop. This review covers its specifications, features and uses.
Quick Verdict
Time-of-Flight measures distance by timing light, so it delivers a complete depth image at video rate with no moving parts and no projector pattern. The blaze uses Sony's DepthSense sensor and its own laser diodes to cover 0.3 to 10 m at up to 30 fps, in a sealed IP67 housing of about 10 cm. A 940 nm version is intended for daylight. Accuracy is lower than structured-light cameras, so this is a camera for volumes, obstacles and pallets, not for micron inspection. The page used does not state resolution or accuracy.
Basler blaze at a Glance
Technology: Time-of-Flight
Working distance: 0.3 to 10 m
Frame rate: up to 30 fps
Field of view: 67 x 51 or 108 x 77 degrees
Protection: IP67
Price: by model
Basler blaze Technical Specifications
The table below lists what the manufacturer states for the camera.
Specification | Basler blaze |
Manufacturer | Basler AG |
Technology | Time-of-Flight |
Sensor | Sony IMX556 DepthSense, backside-illuminated |
Light source | Integrated VCSEL diodes |
Wavelength | 850 nm or 940 nm |
Working distance | 0.3 to 10 m |
Frame rate | Up to 30 fps |
Field of view | 67 x 51 degrees or 108 x 77 degrees |
Output | Distance, intensity and confidence maps |
Dimensions | 100 x 81 x 64 mm |
Protection | IP67 |
Connector | M12 |
Resolution, accuracy and weight are not stated on the page used.
Design and Build Quality
Sensor, lens and illumination are in one sealed housing with M12 connectors. Two lens options give a standard or a wide field of view.
Software and Integration
HDR
Dual Exposure HDR handles scenes with bright and dark objects.
Edge Processing
A version with a Linux platform and ARM64 processor runs processing in the camera.
Standards and ROS
The camera works with pylon, GenICam, GenTL and ROS 1 and 2.
Multi-Camera Use
Synchronous operation of several cameras and hardware trigger are supported.
Basler blaze Uses
Logistics
Measuring parcels and pallets and checking load.
Mobile Robots
Obstacle detection and navigation; the 940 nm version suits outdoor light.
Robot Guidance
Locating large objects for palletizing and depalletizing.
Basler blaze Price and Value
Prices vary by model and are listed in Basler's web shop.
For the company behind the product, read the Basler Company Profile: Business, Products and Leadership.
Pros and Cons
Pros
0.3 to 10 m in one camera
30 fps depth video
IP67 housing
940 nm version for daylight
ROS and GenICam support
Cons
Lower accuracy than structured light
Resolution and accuracy not stated on the page used
Sensitive to very reflective or absorbing surfaces, as with ToF in general
Who Should Buy the Basler blaze?
It fits builders of logistics systems and mobile machines who need robust real-time depth over several metres.
Basler blaze FAQ
How much does the Basler blaze cost?
Prices vary by model and are listed in Basler's web shop.
What is the range of the Basler blaze?
0.3 to 10 m.
How fast is the Basler blaze?
Up to 30 fps.
What sensor does the Basler blaze use?
The Sony IMX556 DepthSense sensor.
Can the Basler blaze work outdoors?
The 940 nm version is intended for daylight and outdoor use.
Is the Basler blaze waterproof?
It is rated IP67.
Does the Basler blaze support ROS?
Yes, ROS 1 and 2.
What is the field of view of the Basler blaze?
67 x 51 degrees or 108 x 77 degrees.
Specifications are based on manufacturer information and may change.
