AVAL DATA ABA-003IR-CL SWIR Camera Review
Updated: 7 days ago
AVAL DATA ABA-003IR-CL provides a 640 × 512 image with global-shutter acquisition through Camera Link, SDR connector. Its documented frame-rate configuration is 62 fps at listed short exposure; 31 fps at listed 16 ms exposure. Price: Request a quote.
The camera should be selected as part of an imaging system rather than evaluated from one headline specification. The useful result is an image that reveals the required feature at the right time, followed by a reliable inspection or measurement decision. This review considers the documented acquisition package, optical implications and practical purchasing scope for ABA-003IR-CL.
Quick Verdict
ABA-003IR-CL supplies a cooled SWIR image through Camera Link. It merits evaluation when a material or feature provides useful contrast in the documented infrared band and a dedicated receiver suits the system. The pixel grid is modest, so spatial scale and spectral information should be justified together.
ABA-003IR-CL at a Glance
Product: AVAL DATA ABA-003IR-CL
Image format: 640 × 512
Acquisition: Global
Interface: Camera Link, SDR connector
Capture rate: 62 fps at listed short exposure; 31 fps at listed 16 ms exposure
Sensor: Peltier-cooled InGaAs
Spectral band: 950–1700 nm in manufacturer release
Pixel size: 20 µm
Active sensor dimensions: 12.8 × 10.24 mm
Output: 8, 10, 12 or 14-bit
Lens mount: C-mount
Body: 58 × 58 × 115 mm, excluding protrusions
Price: Request a quote
ABA-003IR-CL Technical Specifications
Specification | Value or configuration |
Product | AVAL DATA ABA-003IR-CL |
Image format | 640 × 512 |
Acquisition | Global |
Interface | Camera Link, SDR connector |
Capture rate | 62 fps at listed short exposure; 31 fps at listed 16 ms exposure |
Sensor | Peltier-cooled InGaAs |
Spectral band | 950–1700 nm in manufacturer release |
Pixel size | 20 µm |
Active sensor dimensions | 12.8 × 10.24 mm |
Output | 8, 10, 12 or 14-bit |
Lens mount | C-mount |
Body | 58 × 58 × 115 mm, excluding protrusions |
Price | Request a quote |
Design and Optical Requirements
The 20 µm pixels and 12.8 by 10.24 mm active area determine the optical starting point. A C-mount connection does not establish SWIR transmission or focus for every lens. Evaluate the lens and illumination over 950–1700 nm on representative materials. Cooling and correction settings should be stabilized before comparing image response.
Acquisition Speed and Integration
The manufacturer release gives 62 fps at a listed short exposure and 31 fps at 16 ms exposure. The timing depends on exposure and output behavior; it is not one unconditional rate. The CL model requires the specified Camera Link receiving path. The separately named GE model supplies Gigabit Ethernet and should not be assigned to the CL unit.
Programming and Image Processing
The documented capabilities include external triggering, internal cooling, defective-pixel correction, shading correction, lookup tables, programmable output representation. Use those controls to establish a repeatable acquisition recipe for the station. Determine which adjustments are performed in the camera and which belong in the host software. Store the chosen settings with the inspection configuration so an operator or service technician can reproduce the image used during commissioning. A parameter change should be evaluated against both good and faulty samples before it becomes the production default.
Image Data and Host Capacity
As an engineering estimate, a 640 × 512 frame represented as one uncompressed 8-bit value per pixel contains about 0.33 MB of pixel data, using decimal megabytes. This excludes transport overhead and metadata. It is a sizing example, not a measured camera transfer rate; other output representations change the data volume. Multiply the selected frame size by the planned acquisition rate when budgeting host memory, processing and storage, then validate the complete pipeline under realistic load.
ABA-003IR-CL Applications and Use Cases
Material contrast, semiconductor observation and glass or food inspection can merit a spectral sample trial. Actual transmission and response depend on material composition, thickness and illumination. The camera does not establish chemical identification or a certified quality decision merely by observing an infrared image.
Building a Useful Acceptance Trial
Prepare representative parts or scenes that include the smallest required feature, normal production variation and realistic faults. Confirm the field of view and exposure before tuning the inspection. Record wrong accepts, wrong rejects, missing frames and the complete trigger-to-decision timing. A trial should also show what happens when the expected image is absent or unusable. This connects camera selection to the station's actual acceptance requirement rather than relying on a sharp reference picture.
ABA-003IR-CL Price and Value
Price: Request a quote. Ask for the complete ABA-003IR-CL ordering code and an itemized scope covering the camera, suitable optics, receiving hardware, cables, power and commissioning. Compare quotations for the same image format, acquisition mode and integration scope. The cost of a camera component is different from the cost of a working inspection station. Evaluate any financial return with the plant's actual labor, defect, rework and maintenance data; no universal payback period follows from these specifications.
Comparison and Selection
ABA-003IR-GE and ABA-003IR-CL are separate interface configurations around the published SWIR family. Compare receiving software, wiring, supported output and timing. A newer SWIR camera may have a different sensor grid, cooling arrangement or spectral response. Validate the actual feature contrast rather than choosing from wavelength range alone.
Ordering, Environment and Lifecycle
The detailed cited release dates from 2015, so request a current availability and support statement. The directory description mixes CL and GE wording; this review follows the manufacturer’s interface table for the CL model. Confirm current SDK, receiver, power, cooling settings and output-mode specification. Planned certifications in an old release should not be presented as current certified status.
Pros and Cons
Pros
Cooled InGaAs imaging in the documented SWIR band.
Explicit CL versus GE interface distinction.
Multiple output bit depths and correction controls.
Cons
Current lifecycle requires confirmation from the supplier.
SWIR optics and material contrast need testing.
Exposure affects achievable capture timing.
Who Should Buy ABA-003IR-CL?
Shortlist ABA-003IR-CL when its documented sensor, interface and acquisition mode match the imaging task and the team can demonstrate the complete host pipeline. Use the sample trial to establish whether the relevant features remain distinguishable under the expected lighting, presentation and motion. Before purchase, settle the optical configuration, ordering variants and support requirements. The best choice is the configuration that satisfies the acceptance criteria with a maintainable system architecture.
ABA-003IR-CL FAQ
What is the native resolution of ABA-003IR-CL?
640 × 512 pixels is the documented native image format. Evaluate the optics and required feature scale alongside that pixel count.
Which shutter architecture does it use?
The documented sensor uses a global shutter. A common exposure interval across the image does not eliminate blur caused by movement during exposure.
What interface is required?
Camera Link, SDR connector is the documented acquisition interface. Match the receiving hardware and software to the exact ordering configuration.
What is the maximum frame rate?
The documented rate is 62 fps at listed short exposure; 31 fps at listed 16 ms exposure. Confirm the specified operating mode; maximum capture rate is not a guarantee of completed inspection throughput.
Which acquisition features are documented?
The product information includes external triggering, internal cooling, defective-pixel correction, shading correction, lookup tables, programmable output representation. Configure the selected functions around the actual trigger and image-processing requirement.
What should be included in a system comparison?
ABA-003IR-GE and ABA-003IR-CL are separate interface configurations around the published SWIR family. Compare receiving software, wiring, supported output and timing. A newer SWIR camera may have a different sensor grid, cooling arrangement or spectral response. Validate the actual feature contrast rather than choosing from wavelength range alone.
How much does the camera cost?
Price: Request a quote. Include the exact camera variant, optics, receiving hardware, power, cables and commissioning.
What should be tested before ordering?
Test representative good and faulty samples, the intended optical geometry, image timing, capture diagnostics and the complete result association with each inspected part.
Price: Request a quote. Final configuration, pricing, availability and support terms depend on the supplier's current quotation.
