Robotic Sizing Press Loader Model 220 Review: Specs, Price and Applications
Adaptec's Model 220 Sizing Press Loader automates press load and unload operations using part singulation, an infeed conveyor and FANUC iRVision for orientation. A3 describes typical dual grippers for picking incoming parts and removing finished parts.
The product is assessed here as an engineering option rather than a universal solution. Performance in service is determined by the selected configuration, workpiece characteristics, mechanical loads and the surrounding automation architecture.
Quick Verdict
Vision-based part identification. Buyers should account for the limitation that rated cycle times not reported on a3.
Specifications at a Glance
Specification | Details |
Model | 220 |
Vision system | FANUC iRVision |
Feed methods | Vibratory table or infeed belt |
Typical tooling | Dual grippers |
Price | Request a quote |
Design and Operating Principle
The core function is automated sizing press loading. The listing describes Adaptec's Model 220 Sizing Press Loader automates press load and unload operations using part singulation, an infeed conveyor and FANUC iRVision for orientation. A3 describes typical dual grippers for picking incoming parts and removing finished parts. Those reported characteristics help frame the initial engineering requirements but should not replace drawings or a test with real parts.
Robot tooling or machine peripherals operate inside a wider control system. For a reliable design, the cell layout and sequence must allow safe handoffs, accessible maintenance and proper handling of rejected parts or interruptions. Application requirements should determine which optional functions are justified.
Integration and Selection
Confirm dimensions, utility requirements, load and cycle demands, machine handshakes and commissioning procedures. Validate the sequence using representative samples and define protective measures appropriate to the entire automation cell.
Before ordering, seek a project-specific configuration and identify installation ownership, spares, service arrangements and throughput acceptance criteria. If the A3 page provides no numeric rating for a requirement, the figure must be obtained from the supplier rather than estimated.
Industry Applications
Specification | Details |
General manufacturing | Automated sizing press loading |
Factory automation | Vision-guided part orientation |
Machine integration | Simultaneous load and unload planning |
Functional Uses
Automated sizing press loading
Vision-guided part orientation
Simultaneous load and unload planning
Pros and Cons
Advantages
Vision-based part identification
Supports two feed strategies
Dual-gripper workflow
Limitations
Rated cycle times not reported on A3
Gripper dimensions and press-specific safeguards must be engineered
Who Should Consider This Product?
Manufacturing engineers, plant automation leaders and integrators who can match the product's stated capabilities with a specific machine process and verify performance during an acceptance trial.
Price and Availability
Price: Request a quote. Configuration and integration scope affect the total installed cost.
Further Reading
Frequently Asked Questions
What is Robotic Sizing Press Loader Model 220?
Adaptec's Model 220 Sizing Press Loader automates press load and unload operations using part singulation, an infeed conveyor and FANUC iRVision for orientation. A3 describes typical dual grippers for picking incoming parts and removing finished parts.
Which key specifications are provided on A3?
Model: 220; Vision system: FANUC iRVision; Feed methods: Vibratory table or infeed belt; Typical tooling: Dual grippers.
What tasks can it support?
Automated sizing press loading; Vision-guided part orientation; Simultaneous load and unload planning.
What should an integrator verify?
Rated cycle times not reported on A3; Gripper dimensions and press-specific safeguards must be engineered.
How much does it cost?
Request a quote based on the exact project configuration.
