ABB GoFa CRB 15000-5 vs FAIRINO FR5: Cobot Comparison
Updated: 11 hours ago
IN A NUTSHELL
🔎 THE KEY DIFFERENCE Reach figures need careful reading: ABB GoFa CRB 15000-5 lists 950 mm wrist; 1,050 mm flange, while FAIRINO FR5 lists 922 mm. Check the same tool position and reference point before deciding which robot reaches your fixture. |
→ CONSIDER ABB GoFa CRB 15000-5 Consider it when the stated load suits your task and its exact reach reference matches your layout. This article compares 5 kg with a published reach of 950 mm wrist; 1,050 mm flange; include the gripper and part in the load. |
→ CONSIDER FAIRINO FR5 Consider it when the stated load suits your task and its exact reach reference matches your layout. This article compares 5 kg with a published reach of 922 mm; include the gripper and part in the load. |
💡 THE TAKEAWAY Check the real tool, movement path and safety assessment before choosing. A collaborative label does not make every task safe without guarding; compare complete installation quotes. |
ABB GoFa CRB 15000-5 vs FAIRINO FR5 is a buying comparison built around the actual robot configurations, not a collection of family maxima. The FR5 is a close nominal load match; the small reach difference needs a reference-aware study rather than a universal reach winner. The useful result is a cell that meets its load, quality, access and throughput requirements with a maintainable integration plan.
The starting-price figures used here are USD 34,000 for ABB GoFa CRB 15000-5 and USD 7,999 for FAIRINO FR5, taken from the individual ATC reviews. They are indicative review prices rather than binding current quotations. This guide separates rated payload, published workspace, positioning repeatability and complete-system requirements so that a cheaper or larger arm is not mistaken for a valid finished-cell alternative.
Quick verdict
ABB GoFa CRB 15000-5: A dry industrial bench, light assembly or a small machine-tending cell where the full tool-and-part combination stays within 5 kg. The 950 mm wrist and 1,050 mm flange references must remain distinct. IP54 is the reviewed configuration's environmental limit; do not borrow the larger GoFa models' IP67 rating.
FAIRINO FR5: Cost-sensitive general handling and light machine tending within a 5 kg rated load and 922 mm reach. FAIRINO's current FR5 product page lists ±0.02 mm pose repeatability. Keep the rated load separate from higher conditional maximum-load claims.
ABB GoFa CRB 15000-5 vs FAIRINO FR5: technical specifications
Specification | ABB GoFa CRB 15000-5 | FAIRINO FR5 |
|---|---|---|
Rated payload | 5 kg | 5 kg |
Published reach / geometry | 950 mm wrist; 1,050 mm flange | 922 mm |
Position repeatability | ±0.02 mm | ±0.02 mm |
Controlled axes | 6 | 6 |
Arm / system mass in review | 28 kg | 22 kg |
Arm protection | IP54 | IP66 |
Controller / HMI | ABB OmniCore C30 | 10.1-inch teach pendant or web app on a mobile device |
Indicative starting price | USD 34,000 | USD 7,999 |
The figures refer to the variants discussed in the linked reviews. ABB distinguishes wrist and flange reach; those references must be retained in any layout comparison.
Payload: start with the complete attached tool
The two robots share a 5 kg nominal rating. That is a screening boundary for the entire attached load, not a promise that either can carry a 5 kg part plus a gripper. Subtract adapters, valves, cables and the complete end effector before allocating part mass. Then check the actual center of gravity, tool moment and inertia against the manufacturer's load conditions.
For this pair, the reviewed masses are 28 kg for ABB GoFa CRB 15000-5 and 22 kg for FAIRINO FR5. Installation mass is separate from tool payload. Include the mounting frame, anchoring, lifting method and service access in the concept. A lighter arm may simplify handling, while a heavier installation may demand a different support structure; neither is a reason to omit dynamic-load and stability checks.
Workspace and posture: check every required pose
ABB GoFa CRB 15000-5 is listed with 950 mm wrist; 1,050 mm flange, compared with 922 mm for FAIRINO FR5. These figures are useful for an initial layout but do not by themselves describe the usable workspace of the actual tool. An endpoint may be reachable while its required orientation, approach corridor or escape path is not. Include the machine door, fixture, cables and maximum part envelope in the study.
A matched joint count does not make the joint limits, singularity behavior, approach geometry or cable routing identical. Use a representative tool model in simulation or a physical trial. Include the deepest process pose, the farthest pickup, a reject position and a maintenance or recovery pose. If the cheaper concept needs an added slide or relocated fixture, count that work before comparing arm prices.
ABB GoFa CRB 15000-5: engineering assessment
The reviewed ABB GoFa CRB 15000-5 combines 5 kg rated load with 950 mm wrist; 1,050 mm flange and ±0.02 mm positioning repeatability. Start with the available work surface and actual tool mass. The useful reason to buy this model is an ABB engineering workflow that fits the job, rather than a promise that a tighter robot specification will compensate for a flexible fixture.
The 950 mm wrist and 1,050 mm flange references must remain distinct. IP54 is the reviewed configuration's environmental limit; do not borrow the larger GoFa models' IP67 rating. An existing ABB team may gain from using RAPID and RobotStudio, but that benefit should be assessed against the offered controller version, enabled options and the staff who will maintain the application.
FAIRINO FR5: where the alternative adds value
The reviewed FAIRINO FR5 offers 5 kg rated load, 922 mm and ±0.02 mm positioning repeatability. Graphical teaching, web access and SDK options can be useful when the integrator has a defined software plan. Ask who maintains that plan and how the system recovers from a failed machine or network command.
FAIRINO's current FR5 product page lists ±0.02 mm pose repeatability. Keep the rated load separate from higher conditional maximum-load claims.
Positioning, force interaction and process quality
Both models state ±0.02 mm position repeatability in this comparison. There is no numerical repeatability winner on those figures. Move the evaluation toward the completed process: tool calibration, fixture stability, part variation, path requirements and the way the system identifies and recovers from an incorrect result. Equal nominal specifications are not evidence of equal application performance.
The existing review contains differently presented positioning figures. For FAIRINO FR5, this comparison uses ±0.02 mm from FAIRINO's current product page, which labels it as pose repeatability per ISO 9283. Confirm the offered model revision in the quotation rather than silently mixing an older table with a current specification.
Programming, interfaces and ownership
The ABB source identifies ABB OmniCore C30. RAPID and RobotStudio are part of the ABB workflow described in the reviews. A familiar software environment can reduce maintenance friction, but only if the actual team can back up, diagnose and restore the application. Ask for the exact version and the rights to the finished program.
The alternative's reviewed control or HMI arrangement is 10.1-inch teach pendant or web app on a mobile device. The review describes graphical teaching and software integration options. Confirm enabled SDK, ROS and machine-interface capabilities on the supplied package.
Write an I/O and network schedule for the gripper, PLC, machine, inspection device and safety system. Verify voltages, connector pinouts, signal direction and timeout behavior. A protocol listed in a review is not proof that every license or board is supplied. Include a lost communication link, failed acknowledgement and an interrupted production sequence in the acceptance demonstration.
Safety, environment and real cycle time
Collaborative capability is one element of an application risk assessment. The tool, carried object, machine, hot or sharp process and trapping points may need safeguards beyond the arm's own functions. Establish intended operating modes and validate the completed safety concept with representative operator access. A collaborative label is not permission to assume that fencing or sensing is unnecessary.
The ABB review lists IP54 for the arm. The alternative is reviewed at IP66. Ingress ratings do not authorize every cleaning chemical, steam treatment or pressure-washing procedure. Check the controller, cable exits, connectors and tool independently, and distinguish standard protection from a paid option.
Compare useful output using the same part, tool, normal safety settings and peripheral delays. Maximum or typical TCP speeds are not a matched cycle-time benchmark. Gripping, machine dwell, process time and operator visits may dominate. Record good parts, rejected parts, changeover and restart time alongside motion time before turning a supplier demonstration into a payback estimate.
Price and total installed cost
The indicative starting prices are USD 34,000 and USD 7,999, a difference of USD 26,001. The lower-priced arm is FAIRINO FR5. Those figures come from the linked ATC reviews and may change. They do not establish equivalent controllers, pendants, safety equipment, software, stock or turnkey scope.
Request comparable bills of materials covering the robot, tool, fixture, machine interface, vision, safety devices, controller options, commissioning and training. Include freight, tax and installation where relevant. Name the supplier responsible for diagnosing faults across component boundaries and obtain configuration-specific warranty and delivery commitments. A cheap arm that needs an unsuitable layout changed is not automatically the cheaper installed system.
How to choose for a representative application
Decision | Start by testing | Why it matters |
|---|---|---|
Load and tooling | 5 kg versus 5 kg | Include all adapters and attached equipment |
Workspace | 950 mm wrist; 1,050 mm flange versus 922 mm | Match geometric references and tool orientation |
Configuration | 6 versus 6 controlled axes | Do not merge different operating concepts |
Process quality | ±0.02 mm versus ±0.02 mm | Measure the finished result, not only robot position |
Value | USD 34,000 versus USD 7,999 | Align the installed package and maintenance plan |
The FR5 is a close nominal load match; the small reach difference needs a reference-aware study rather than a universal reach winner. For the ABB candidate, the application to demonstrate is: a dry industrial bench, light assembly or a small machine-tending cell where the full tool-and-part combination stays within 5 kg. For the alternative, evaluate: cost-sensitive general handling and light machine tending within a 5 kg rated load and 922 mm reach. If a load, pose or safety requirement fails, redesign the concept before judging its apparent purchase-price saving.
Acceptance testing before purchase
Give both suppliers the same workpiece range, complete tool CAD, load data, required poses, target cycle, environmental exposure and intended operator interaction. Agree pass criteria before the trial. Test a missed pickup, a rejected part, a stopped machine and restart after power loss. Ask the intended operator to change a recipe and recover the sequence safely; a supplier-only demonstration is not a maintenance handover.
Retain the program, safety configuration, I/O schedule, tool settings and backup procedure. Establish support escalation, replacement-part responsibilities and the revision of the equipment being supplied. Where contact or dual-arm coordination is involved, keep the demonstrated process settings in the acceptance record so that later changes do not silently invalidate the qualified result.
Complete product reviews
Frequently asked questions
Which should I choose: ABB GoFa CRB 15000-5 or FAIRINO FR5?
The FR5 is a close nominal load match; the small reach difference needs a reference-aware study rather than a universal reach winner. A dry industrial bench, light assembly or a small machine-tending cell where the full tool-and-part combination stays within 5 kg. Cost-sensitive general handling and light machine tending within a 5 kg rated load and 922 mm reach. Choose the concept that passes the actual tool-load, workspace, process-quality and safety tests with an acceptable installed quotation and maintenance plan.
What are the indicative starting prices in US dollars?
The ATC reviews list ABB GoFa CRB 15000-5 from USD 34,000 and FAIRINO FR5 from USD 7,999. The difference is USD 26,001. Prices are indicative and may change; confirm the supplied controller, pendant, software, safety equipment, tooling, delivery and integration scope.
Does the payload rating include the gripper?
Yes. Allocate the permitted load to the complete end effector, adapters and carried part, then check moments and inertia. The ratings used here are 5 kg and 5 kg. A part within the headline rating can still become an excessive load when its tooling is added.
Which has the longer usable workspace?
ABB GoFa CRB 15000-5 lists 950 mm wrist; 1,050 mm flange, while FAIRINO FR5 lists 922 mm. Verify matching geometric references, tool orientations, approach paths and obstacles. A larger nominal number does not guarantee every required pose or a faster completed cycle.
Does repeatability guarantee the finished-part tolerance?
No. The comparison uses ±0.02 mm for ABB GoFa CRB 15000-5 and ±0.02 mm for FAIRINO FR5. These positioning figures do not independently establish absolute accuracy or completed-process tolerance. Fixtures, tooling, calibration, part variation and contact behavior must be included in the acceptance test.
Do collaborative robots always work without guarding?
No. The complete application needs risk assessment and validation. Tools, sharp or hot objects, trapping points, neighboring equipment and access patterns may require guarding, sensing, interlocks or speed limits beyond the arm's own functions.
Are all controller and software options included?
Not automatically. The source identifies 10.1-inch teach pendant or web app on a mobile device for FAIRINO FR5, but only a current quotation defines what is supplied and enabled. Confirm programming tools, protocol licenses, hardware interfaces, backups and ownership of the final application program.
What should the supplier demonstrate before purchase?
Require the real tool, representative parts and normal operating settings. Include critical poses, process quality, a realistic cycle, lost grip or communication, operator interruption and safe restart. Record acceptance criteria and retain the configuration and program used in the successful trial.
Specifications and indicative review prices describe the exact configurations discussed. Confirm the offered revision, package, safety requirements, warranty and delivery with the supplier. This is an editorial buying comparison and does not claim a hands-on performance benchmark.
