ABB GoFa CRB 15000-10 vs Flexiv Rizon 10: Cobot Comparison
Updated: 11 hours ago
IN A NUTSHELL
🔎 THE KEY DIFFERENCE Reach figures need careful reading: ABB GoFa CRB 15000-10 lists 1,520 mm wrist; 1,620 mm flange, while Flexiv Rizon 10 lists 941 mm. Check the same tool position and reference point before deciding which robot reaches your fixture. ABB GoFa CRB 15000-10 has 6 axes, compared with 7 axes for Flexiv Rizon 10. |
→ CONSIDER ABB GoFa CRB 15000-10 Consider it when the stated load suits your task and its exact reach reference matches your layout. This article compares 10 kg with a published reach of 1,520 mm wrist; 1,620 mm flange; include the gripper and part in the load. |
→ CONSIDER Flexiv Rizon 10 Consider it when the stated load suits your task and its exact reach reference matches your layout. This article compares 10 kg with a published reach of 941 mm; include the gripper and part in the load. |
💡 THE TAKEAWAY Check the required tool angles and approach path: different axis counts change movement options. Choose only after both suppliers demonstrate the loaded task and quote the same complete installation. |
ABB GoFa CRB 15000-10 vs Flexiv Rizon 10 is a buying comparison built around the actual robot configurations, not a collection of family maxima. Rizon's adaptive contact-control emphasis and seventh joint address a different engineering brief from GoFa's longer workspace. The useful result is a cell that meets its load, quality, access and throughput requirements with a maintainable integration plan.
The starting-price figures used here are USD 40,000 for ABB GoFa CRB 15000-10 and USD 55,000 for Flexiv Rizon 10, taken from the individual ATC reviews. They are indicative review prices rather than binding current quotations. This guide separates rated payload, published workspace, positioning repeatability and complete-system requirements so that a cheaper or larger arm is not mistaken for a valid finished-cell alternative.
Quick verdict
ABB GoFa CRB 15000-10: Distributed machine tending and handling when the 1,520 mm wrist workspace can avoid a slide or moving a fixture. Its longer reach is paired with 10 kg, not the 12 kg load rating of GoFa 12. Both wrist and flange reference positions matter when using a supplier's reach study.
Flexiv Rizon 10: A contact-rich process that can use adaptive force-control behavior and seven-axis posture flexibility. The reviewed 941 mm reach and 10 kg payload belong to the base Rizon 10, distinct from the wrist-sensor configuration.
ABB GoFa CRB 15000-10 vs Flexiv Rizon 10: technical specifications
Specification | ABB GoFa CRB 15000-10 | Flexiv Rizon 10 |
|---|---|---|
Rated payload | 10 kg | 10 kg |
Published reach / geometry | 1,520 mm wrist; 1,620 mm flange | 941 mm |
Position repeatability | ±0.02 mm | ±0.05 mm |
Controlled axes | 6 | 7 |
Arm / system mass in review | 51 kg | 38 kg |
Arm protection | IP67 | IP65 |
Controller / HMI | ABB OmniCore C30 | Flexiv Hesper robot controller (12 kg, 423 × 230 × 230 mm, IP20, 500 W) |
Indicative starting price | USD 40,000 | USD 55,000 |
The figures refer to the variants discussed in the linked reviews. ABB distinguishes wrist and flange reach; those references must be retained in any layout comparison.
Payload: start with the complete attached tool
The two robots share a 10 kg nominal rating. That is a screening boundary for the entire attached load, not a promise that either can carry a 10 kg part plus a gripper. Subtract adapters, valves, cables and the complete end effector before allocating part mass. Then check the actual center of gravity, tool moment and inertia against the manufacturer's load conditions.
For this pair, the reviewed masses are 51 kg for ABB GoFa CRB 15000-10 and 38 kg for Flexiv Rizon 10. Installation mass is separate from tool payload. Include the mounting frame, anchoring, lifting method and service access in the concept. A lighter arm may simplify handling, while a heavier installation may demand a different support structure; neither is a reason to omit dynamic-load and stability checks.
Workspace and posture: check every required pose
ABB GoFa CRB 15000-10 is listed with 1,520 mm wrist; 1,620 mm flange, compared with 941 mm for Flexiv Rizon 10. These figures are useful for an initial layout but do not by themselves describe the usable workspace of the actual tool. An endpoint may be reachable while its required orientation, approach corridor or escape path is not. Include the machine door, fixture, cables and maximum part envelope in the study.
ABB GoFa CRB 15000-10 has 6 controlled axes, while Flexiv Rizon 10 has 7. The seventh joint can provide additional elbow-posture choices without automatically increasing load capacity, reach or process accuracy. Demonstrate the real motion, not just a hand-positioned endpoint.
ABB GoFa CRB 15000-10: engineering assessment
The reviewed ABB GoFa CRB 15000-10 combines 10 kg rated load with 1,520 mm wrist; 1,620 mm flange and ±0.02 mm positioning repeatability. Include the distant pickup and deepest machine approach in the same demonstration. The larger swept volume can simplify process layout while making guarding, cable routing and operator access more demanding.
Its longer reach is paired with 10 kg, not the 12 kg load rating of GoFa 12. Both wrist and flange reference positions matter when using a supplier's reach study. An existing ABB team may gain from using RAPID and RobotStudio, but that benefit should be assessed against the offered controller version, enabled options and the staff who will maintain the application.
Flexiv Rizon 10: where the alternative adds value
The reviewed Flexiv Rizon 10 offers 10 kg rated load, 941 mm and ±0.05 mm positioning repeatability. Qualify the process using force behavior, rejection detection and recovery with real parts. A tight positioning figure alone is not a substitute for a controlled contact process, and a force-capable arm still needs appropriate tooling and tuning.
The reviewed 941 mm reach and 10 kg payload belong to the base Rizon 10, distinct from the wrist-sensor configuration.
Positioning, force interaction and process quality
The tighter stated position-repeatability value is ±0.02 mm, compared with ±0.05 mm for the other robot. That is a useful shortlist input, not a finished-part tolerance guarantee. Repeatability concerns returning to a pose under specified conditions; absolute accuracy, tool calibration, fixture movement and process variation remain separate engineering concerns.
This alternative's force-oriented features should be qualified through a contact-process test rather than inferred from positioning repeatability. Use misaligned and nominal parts, set the permitted forces and define how a jam or incomplete seating is detected. Tool stiffness, compliance, calibration and controller configuration remain part of the solution even when sensing is built in.
Programming, interfaces and ownership
The ABB source identifies ABB OmniCore C30. RAPID and RobotStudio are part of the ABB workflow described in the reviews. A familiar software environment can reduce maintenance friction, but only if the actual team can back up, diagnose and restore the application. Ask for the exact version and the rights to the finished program.
The alternative's reviewed control or HMI arrangement is Flexiv Hesper robot controller (12 kg, 423 × 230 × 230 mm, IP20, 500 W). Verify the programming interface, licenses, communication options and integration responsibilities in the offered package.
Write an I/O and network schedule for the gripper, PLC, machine, inspection device and safety system. Verify voltages, connector pinouts, signal direction and timeout behavior. A protocol listed in a review is not proof that every license or board is supplied. Include a lost communication link, failed acknowledgement and an interrupted production sequence in the acceptance demonstration.
Safety, environment and real cycle time
Collaborative capability is one element of an application risk assessment. The tool, carried object, machine, hot or sharp process and trapping points may need safeguards beyond the arm's own functions. Establish intended operating modes and validate the completed safety concept with representative operator access. A collaborative label is not permission to assume that fencing or sensing is unnecessary.
The ABB review lists IP67 for the arm. The alternative is reviewed at IP65. Ingress ratings do not authorize every cleaning chemical, steam treatment or pressure-washing procedure. Check the controller, cable exits, connectors and tool independently, and distinguish standard protection from a paid option.
Compare useful output using the same part, tool, normal safety settings and peripheral delays. Maximum or typical TCP speeds are not a matched cycle-time benchmark. Gripping, machine dwell, process time and operator visits may dominate. Record good parts, rejected parts, changeover and restart time alongside motion time before turning a supplier demonstration into a payback estimate.
Price and total installed cost
The indicative starting prices are USD 40,000 and USD 55,000, a difference of USD 15,000. The lower-priced arm is ABB GoFa CRB 15000-10. Those figures come from the linked ATC reviews and may change. They do not establish equivalent controllers, pendants, safety equipment, software, stock or turnkey scope.
Request comparable bills of materials covering the robot, tool, fixture, machine interface, vision, safety devices, controller options, commissioning and training. Include freight, tax and installation where relevant. Name the supplier responsible for diagnosing faults across component boundaries and obtain configuration-specific warranty and delivery commitments. A cheap arm that needs an unsuitable layout changed is not automatically the cheaper installed system.
How to choose for a representative application
Decision | Start by testing | Why it matters |
|---|---|---|
Load and tooling | 10 kg versus 10 kg | Include all adapters and attached equipment |
Workspace | 1,520 mm wrist; 1,620 mm flange versus 941 mm | Match geometric references and tool orientation |
Configuration | 6 versus 7 controlled axes | Do not merge different operating concepts |
Process quality | ±0.02 mm versus ±0.05 mm | Measure the finished result, not only robot position |
Value | USD 40,000 versus USD 55,000 | Align the installed package and maintenance plan |
Rizon's adaptive contact-control emphasis and seventh joint address a different engineering brief from GoFa's longer workspace. For the ABB candidate, the application to demonstrate is: distributed machine tending and handling when the 1,520 mm wrist workspace can avoid a slide or moving a fixture. For the alternative, evaluate: a contact-rich process that can use adaptive force-control behavior and seven-axis posture flexibility. If a load, pose or safety requirement fails, redesign the concept before judging its apparent purchase-price saving.
Acceptance testing before purchase
Give both suppliers the same workpiece range, complete tool CAD, load data, required poses, target cycle, environmental exposure and intended operator interaction. Agree pass criteria before the trial. Test a missed pickup, a rejected part, a stopped machine and restart after power loss. Ask the intended operator to change a recipe and recover the sequence safely; a supplier-only demonstration is not a maintenance handover.
Retain the program, safety configuration, I/O schedule, tool settings and backup procedure. Establish support escalation, replacement-part responsibilities and the revision of the equipment being supplied. Where contact or dual-arm coordination is involved, keep the demonstrated process settings in the acceptance record so that later changes do not silently invalidate the qualified result.
Complete product reviews
Frequently asked questions
Which should I choose: ABB GoFa CRB 15000-10 or Flexiv Rizon 10?
Rizon's adaptive contact-control emphasis and seventh joint address a different engineering brief from GoFa's longer workspace. Distributed machine tending and handling when the 1,520 mm wrist workspace can avoid a slide or moving a fixture. A contact-rich process that can use adaptive force-control behavior and seven-axis posture flexibility. Choose the concept that passes the actual tool-load, workspace, process-quality and safety tests with an acceptable installed quotation and maintenance plan.
What are the indicative starting prices in US dollars?
The ATC reviews list ABB GoFa CRB 15000-10 from USD 40,000 and Flexiv Rizon 10 from USD 55,000. The difference is USD 15,000. Prices are indicative and may change; confirm the supplied controller, pendant, software, safety equipment, tooling, delivery and integration scope.
Does the payload rating include the gripper?
Yes. Allocate the permitted load to the complete end effector, adapters and carried part, then check moments and inertia. The ratings used here are 10 kg and 10 kg. A part within the headline rating can still become an excessive load when its tooling is added.
Which has the longer usable workspace?
ABB GoFa CRB 15000-10 lists 1,520 mm wrist; 1,620 mm flange, while Flexiv Rizon 10 lists 941 mm. Verify matching geometric references, tool orientations, approach paths and obstacles. A larger nominal number does not guarantee every required pose or a faster completed cycle.
Does repeatability guarantee the finished-part tolerance?
No. The comparison uses ±0.02 mm for ABB GoFa CRB 15000-10 and ±0.05 mm for Flexiv Rizon 10. These positioning figures do not independently establish absolute accuracy or completed-process tolerance. Fixtures, tooling, calibration, part variation and contact behavior must be included in the acceptance test.
Does the seventh axis automatically increase performance?
No. An extra joint can provide posture flexibility around obstacles, but it does not automatically increase payload, reach, accuracy or production output. Use the real tool and motion path to test whether that flexibility improves this particular application.
Are all controller and software options included?
Not automatically. The source identifies Flexiv Hesper robot controller (12 kg, 423 × 230 × 230 mm, IP20, 500 W) for Flexiv Rizon 10, but only a current quotation defines what is supplied and enabled. Confirm programming tools, protocol licenses, hardware interfaces, backups and ownership of the final application program.
What should the supplier demonstrate before purchase?
Require the real tool, representative parts and normal operating settings. Include critical poses, process quality, a realistic cycle, lost grip or communication, operator interruption and safe restart. Record acceptance criteria and retain the configuration and program used in the successful trial.
Specifications and indicative review prices describe the exact configurations discussed. Confirm the offered revision, package, safety requirements, warranty and delivery with the supplier. This is an editorial buying comparison and does not claim a hands-on performance benchmark.
