top of page

SAFETY & STANDARDS

Mobile Robot Safety Gets Its Final Chapter, and This Time It’s About You

September 29, 2026 · Updated November 8, 2026

#Safety   #Standards   #AMR

 

Every trilogy needs a finale. The Association for Advancing Automation (A3) has released ANSI/A3 R15.08-3-2026, Industrial Mobile Robots – Safety Requirements – Part 3: Use of IMR Applications, announced on September 29, 2026. It completes the three-part R15.08 series on industrial mobile robot (IMR) safety.

 

Quick recap of the series: Part 1 is about the robot. Part 2 is about the integrator. Part 3 is about the people who run the robots after everyone else has gone home. Spoiler: that’s you.

 

Your homework under Part 3

 

  • Do a risk assessment for each mobile robot application
  • Put the safety measures it calls for in place, and keep them there
  • Document the risk assessment
  • Do it all again whenever the robot, the application or the environment changes after handover. Yes, moving that rack counts.

 

The standard covers IMR Types A, B and C as defined in Part 1. It was developed side by side with Part 3 of ANSI/A3 R15.06, the industrial robot safety standard, so plants running both fixed arms and mobile robots get one consistent playbook. The PDF is available from the A3 store.

 

What it means for automation buyers

 

Safety doesn’t end when the integrator drives away. Before you deploy AMRs or mobile manipulators, decide who owns the risk assessment, how layout changes will be managed, and where the training records live. Future you will be grateful.

 

← All Robotics & Automation News

bottom of page